Route, Departs, (Approx. 12W, Teal This trip is an iStop, Due, 4:59 PM. 22S, Illini This trip is an iStop, Due, 5:00 PM. 22N, Illini This trip is an iStop, Due, 5:00 PM. 13N, Silver This trip is an iStop, 3 mins, 5:03 PM. 12E, Teal Orchard Downs This trip is an iStop, 4 mins, 5:03 PM. 2C, Red, 6 mins, 5:05 PM. Use full ETS Trip Planner or ETS To Go for mobile devices? Get ETS Service Alerts. 'Like' ETS on Facebook.

A Highway Bus Stop in, For operational purposes, there are three main kinds of stops: Scheduled stops, at which the bus should stop irrespective of demand; (or flag stop), at which the vehicle will stop only on request; and stops, at which a vehicle will stop anywhere along the designated section of road on request. Certain stops may be restricted to 'discharge/set-down only' or 'pick-up only'. Some stops may be designated as 'timing points', and if the vehicle is ahead of schedule it will wait there to ensure correct synchronization with the.

In dense urban areas where bus volumes are high, are sometimes used to increase efficiency and reduce delays at bus stops. Fare stages may also be defined by the location of certain stops in distance or zone-based fare collection systems. Sunday stops are close to a church and used only on Sundays. History [ ] The first ever recorded bus stop was in and was believed to be constructed in 1890, linking Bishops Stortford to the town of Colchester. [ ] Design [ ]. Bus stop sign in with line numbers and major stops Bus stop infrastructure ranges from a simple pole and sign, to a rudimentary shelter, to sophisticated structures.

The usual minimum is a pole mounted flag with suitable name/symbol. Bus stop shelters may have a full or partial roof, supported by a two, three or four sided construction. Modern stops are mere steel and glass/perspex constructions, although in other places, such as rural Britain, stops may be wooden brick or concrete built. The construction may include small inbuilt seats. The construction may feature, from simple posters, to complex illuminated, changeable or animated displays. Some installations have also included advertising.

Design and construction may be uniform to reflect a large corporate or local authority provider, or installations may be more personal or distinctive where a small local authority such as a is responsible for the stop. The stop may include separate such as a, and a. Individual bus stops may simply be placed on the sidewalk next to the roadway, although they can also be placed to facilitate use of a. More complex installations can include construction of a or a, for traffic management reasons, although use of a can make these unnecessary. Several bus stops may be grouped together to facilitate easy transfer between routes. These may be arranged in a simple row along the street, or in parallel or diagonal rows of multiple stops.

Groups of bus stops may be integral to. With extra facilities such as a waiting room or ticket office, outside groupings of bus stops can be classed as a rudimentary. Convention is usually for the bus to draw level with the 'flag', although in areas of mixed front and rear entrance buses, such as London, a head stop, and more rarely a tail stop, indicates to the driver whether they should stop the bus with either the rear platform or the drivers cab level with the flag. In certain areas, the area of road next the bus stop may be specially marked, and protected in law. Often, car drivers can be unaware of the legal implications of stopping or parking in a bus-stop. In systems, bus stops may be more elaborate than street bus stops, and can be termed 'stations' to reflect this difference. These may have enclosed areas to allow off-bus fare collection for rapid boarding, and be spaced further apart like tram stops.

Bus stops on a bus rapid transit line may also have a more complex construction allowing, and doors separating the enclosure from the bus until ready to board. This section does not any. Unsourced material may be challenged and.

(August 2013) () Most bus stops are identified with a metal sign attached to a pole or light standard. Some stops are plastic strips strapped on to poles and others involve a sign attached to a bus shelter. The signs are often identified with a picture of a bus and/or with the words 'bus stop' (or similar in non-English-speaking places). The bus stop 'flag' (a panel usually projecting from the top of a bus stop pole) will sometimes contain the route numbers of all the buses calling at the stop, optionally distinguishing frequent, infrequent, 24-hour, and night services. The flag may also show the logo of the dominant bus operator, or the logo of a local transit authority with responsibility for bus services in the area.

Additional information may include an unambiguous, unique name for the stop, and the direction/common destination of most calling routes. Bus stops will often include information, either the full timetable, or for busier routes, the times or frequency that a bus will call at the specific stop. Route maps and tariff information may also be provided, and telephone numbers to relevant travel information services.

The stop may also incorporate, or have nearby, real time information displays with the arrival times of the next buses. Increasingly, technology is being referenced on more remote stops, allowing the next bus times to be sent to a passenger's handset based on the stop location and the real time information. Automated may be provided at busy stops.

Data model [ ] Modern and require a detailed digital representation of stops and stations. The data model, and the related data interchange standard, define how transport systems, including bus stops, should be described for use in computer models. In Transmodel, a single bus stop is modeled as a 'Stop Point', and a grouping of nearby bus stops as a 'Stop Area' or 'Stop Place'. The (GTFS) standard, originally developed by and, defines a simple and widely used data interchange standard for public transport schedules. GTFS also includes a table of stop locations which for each stop gives a name, identifier, location, and identification with any larger station that the stop may be a part of. Also has a modelling standard for bus stops. The United Kingdom has collected a complete database of its public transport access points, including bus stops, into the database with details of 350,000 nodes and which is available as from.

Neglected bus shelter needing repair Bus stops enhance passenger safety in a number of ways: • Bus stops prevent passengers from trying to board or alight in hazardous situations such as at intersections or where a bus is turning and is not using the curb lane. [ ] • A bus driver cannot be expected to continuously look for intending passengers. A bus stop means that the driver only needs to look for intending passengers at the approach to each bus stop.

[ ] • Having bus stops requires passengers to group themselves prior to boarding, which reduces time spent at boarding. [ ] • At night, when passenger numbers are lower, restrictions are sometimes relaxed and passengers may be allowed to exit the bus anywhere within reason.

•, or lay-bys, allow buses to stop without impeding the flow of traffic on the main [ ] Regulation [ ]. Sign marking a temporary bus stop in London Some jurisdictions have introduced particularised legislative controls to foster safer bus stop design and management. The,, for example, has enacted a which contains performance-based duties of care which apply to all industry participants who are in a position to influence the safety of bus operations - what is called the '. The safety duties apply to all bus services, both commercial and non-commercial, and to all buses regardless of.

Breach of the duty is a serious criminal offence which carries a heavy penalty. The primary duty holder under the Bus Safety Act is the operator of the bus service, as the person who has effective responsibility and control over the whole operation.

However, the Act also contains a safety duty covering 'people with responsibility for bus stops', including people who design, build, or maintain the stop, plus those who decide on its location. This duty was introduced in response to research showing that the most serious hazard associated with bus travel occurs when passengers, especially children, are crossing the road after alighting from the bus. The location and layout of a bus stop is therefore a factor in the level of risk. Safety duties are also imposed by the on a range of other people including - • 'bus safety workers' including drivers, schedulers who set bus, and and testers who repair or assess vehicle safety • 'procurers' - people who procure the bus service, known as the 'customer' in the commercial charter sector.

All of these persons can clearly affect bus safety. Dil Hai Ki Manta Nahin All Mp3 Song Download. Free Download Movies For Mobile Nokia C3 01 on this page. They are required by the to ensure that, in carrying out their activities, they eliminate risks to health and safety if 'practicable' - or work to reduce those risks 'so far as is reasonably practicable'.

This familiar practicability formula is borrowed from Victoria's (and a subsequent national model Rail Safety Bill) and the Occupational Health and Safety Act 2004. Research [ ] Many transit agencies have developed guidelines for preferred bus stop spacing.

In most cities, however, the typical bus stop spacing is between 650 and 900 feet (200–275 m), well below the optimal. [ ] Bus stop capacity is often an important consideration in the planning of bus stops serving multiple routes within urban centers.

Limited capacity may mean buses queue up behind each other at the bus stop, which can cause traffic blockages or delays. Bus stop capacity is typically measured in terms of buses/hour that can reliably use the bus stop [ ]. The main factors that affect bus stop capacity are: • Number of loading areas (or number of buses that can stop at one time) • Average (How much time it takes a bus to load/unload passengers) • G/C ratio of nearby (green time / cycle length) [ ] • Clearance time (time it takes bus to re-enter the traffic stream) Detailed procedures for calculating bus stop capacity and bus lane capacity using skip stops are outlined in Part 4 of the, published by the US. Transit agencies are increasingly looking at consolidation of possibly previously haphazardly placed bus stops as a way to improve service cheaply and easily [ ]. Bus stop consolidation evaluates the bus stops along an established bus route and develops a new pattern for optimal bus stop placement. Bus stop consolidation has been proven to improve operating efficiency and ridership on bus routes [ ]. Pantographs and underbody collectors [ ] Fixed and are sometimes integrated in bus stops to quickly recharge, making it possible to use a smaller battery to power the bus, which reduces the investment and subsequent costs.

Fake bus stops [ ] Some have built fake, imitation bus stops for their residents who have. Some of these bus stops are even fitted with outdated advertisements and timetables – 30 years outdated.

The residents will sit at the bus stop waiting for a bus to take them to their imagined destination. After some time, a staff member comes to escort the clients back to the home. In popular culture [ ] Bus stops are common tropes in popular culture. In 1956 there was a Marilyn Monroe film called.

A famous scene in the movie takes place at a bus stop and almost all episodes of series start by presenting the main characters in a bus stop. In Japanese culture, the movie featured a bus stop, both for ordinary buses and a cat bus. The opening scene of the anime shows the main character getting off at a bus stop. The Japanese movie features a rural bus stop. Renowned have taught lessons in from their interaction and experience with bus stops. See also [ ]. • Andrew-Gee, Eric (7 May 2015)...

Retrieved 11 May 2015. • • • July 16, 2007, at the. Bus Lanes and Bus Stops - what's the problem? Retrieved 2017-05-11. Google Developers. Retrieved 2017-05-11.

Retrieved 2010-03-25. Archived from on 2010-03-25. • (Example for one such regulation, in German) •, Part 3.

• Bus Safety Act 2009, section 15. •, section 18. • See Improving Bus Safety in Victoria, a discussion paper published by the in May 2009. • Bus Safety Act 2009, section 17.

• Bus Safety Act 2009, section 16. • • •, • ^ Paulick, Jane.

June 6, 2008. Retrieved June 8, 2008. Glaberson (1 June 1999).. Retrieved 10 October 2010. • 2010-07-31 at the., • Nisson Wolpin (2002).. Mesorah Publications in conjunction with Agudath Israel of America. Retrieved 6 October 2010.

Scheinbaum (February 1998).. Peninim Publications in conjunction with 'The Living Memorial,' a project of the Hebrew Academy of Cleveland. Retrieved 10 October 2010.

• Yonason Rosenblum (2000).. Retrieved 10 October 2010. • External links [ ] has media related to.