Sennheiser SK 100 G2 Manual Online: Technical Data. 2.1 General Power supply voltage. 2 batteries, type mignon AA, 1.5V Nominal voltage. Sennheiser EW100ENG-G2 Condenser. Abracadabra Flashing Software Download here. Wireless Professional Microphone power adapter, mic stand clip, carrying case and original manual (all as pi. Sennheiser ew 100 G2.

The Sennheiser EW100 G2 system allows for easy to use, streamlined connectivity and high quality audio/video production. The EW100 G2 provides musicians and audio/visual workers with an integrated transmitter/receiver arrangement. Learning to use the EW100 G2 may seem daunting, but Sennheiser designed the system to be highly compatible and simple to use. Knowing the button mode on one device allows you to use the other components: the Set button acts as the accept button, the Power button acts as the back or cancel button and the up/down arrows allow you to scroll. 7 Set the sensitivity of the transmitter by going to 'Sensit' within the operating menu. Toggle between the sensitivity numbers. The proper sensitivity for someone talking is between -10 and -20.

The louder the sound is that you are recording, the greater (positive number) the sensitivity setting should be. The sensitivity display should only peak during an event's loudest moment; the average sound level should be right in the middle of the sensitivity meter. Once the sensitivity bar is adjusted correctly, press 'Set.'

When reading the EW 100 G2 manual I see described the range of AF OUT settings for line or mic level (line o to +12; mic -30 to -6dB) My question is how does one choose a setting within these ranges. All the manual says in this regard is: 'Adapt the level of the audio output (AF OUT) to the input of the connected unit.' I don't really know what that means. All I notice is that when I set the AF OUT at a higher number I get a hotter reading on the mixer's meter (SD 302), which I then compensate for by adjusting the gain.

In short, it seems as AF OUT goes up, gain goes down; as AF OUT goes down gain goes up. This all leaves me wondering what the optimal setting(s) are and what makes them that. When reading the EW 100 G2 manual I see described the range of AF OUT settings for line or mic level (line o to +12; mic -30 to -6dB) My question is how does one choose a setting within these ranges. All the manual says in this regard is: 'Adapt the level of the audio output (AF OUT) to the input of the connected unit.' I don't really know what that means. All I notice is that when I set the AF OUT at a higher number I get a hotter reading on the mixer's meter (SD 302), which I then compensate for by adjusting the gain. In short, it seems as AF OUT goes up, gain goes down; as AF OUT goes down gain goes up.

This all leaves me wondering what the optimal setting(s) are and what makes them that. John The higher the AF Out numbers, the stronger the audio signal it's putting out. And when reading the numbers, remember that with negative dB, the bigger the absolute value of the number the smaller is the signal level - ie, a -50 dB signal is weaker than a -25dB signal.

What you're looking for is to stage the gain settings all along the chain so all the equipment is running at its design optimum levels. Let's say you've decided to use line levels so you've set the 302 input where you're connecting the wireless accordingly. That means the mixer is expecting to see a signal nominally at +4dBu presented to it (pro equipment 'line' level is +4dBu, consumer gear is -10dBv). Start by setting the transmitter sensitivity so normal speech sends the AF meter to near full scale but the yellow overmodulation LED doesn't light. Set the 302's coarse gain and fader to their midpoints and its meter to VU mode. Set the G2 AF Out to +4 and speak normally into the microphone. Your voice should send the 302's meters to hover around the 0VU mark with the 302's coarse gain control set somewhere between 1/3 and 2/3 points of its range.

Adjust the G2 recceiver output level until it does. The same idea applies if you want to use mic level settings. Chick Corea Spain Transcription Pdf To Excel. After setting the 302 input and the receiver accordingly, adjust the receiver output setting so it produces a 0VU meter reading on the 302 with the mixer's coarse gain and fader set to their midpoints and you're sending speech that's deflecting the transmitter/receiver AF meter to full scale without overloading.